- Finn-Power UC control
- Fast, efficient and accurate
- Simple installation and start up
- Ergonomic design
Finn-Power NC 40
Hose size up to 2“
Crimping Range – Up to 105mm
93 tons of crimping force
NC20 nut crimping machines produce accurate and consistent results when crimping the nuts, ferrules and bushings on ends of hydraulic hoses. Their various serviceable features make them suitable for serial production.
A special centering pin, selected according to ferrule size is used during the crimping. The machine produces accurate and consistent results.
Standard Inclusions
Integrated UC Control
Mechanical Back Stop
Quick Change Tool
Foot Pedal
Optional Extras
Automatic greasing
Remote Control Unit
Technical Data
| Description | NC40 |
|---|---|
| Crimping Range Ø (mm) ₁ | 12-105 |
| Max. crimping force (kN) | 930 |
| Number of crimping/hour ₂ | 1900 |
| Hose size ID (inch) | 2 |
| Die Set ₃ | NC ₅ |
| Max. opening (mm) ₄ | +26 |
| Master die D/L (mm) | 140 / 37 |
| Control | UC |
| Motor (kW) | 4 |
| Size: Length (mm) | 835 |
| Size: Width (mm) | 885 |
| Size: Height (mm) | 997 |
| Weight incl. oil (kg) | 240 |
Key:
- With standard dies. Crimping range can be increased with special dies.
- Theoretical with 10 mm cycle
- See table for standard die set data
- Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
- NC20, NC30 and NC40 dies can be used
Standard Die Sets
| Part Number | Crimping Range (mm) | Length (mm) |
|---|---|---|
| 18546/12 | 12.0 – 16.0 | 3 |
| 18546/16 | 16.0 – 22.0 | 4 |
| 18546/22 | 22.0 – 27.0 | 4.5 |
| 18546/27 | 27.0 – 34.0 | 5 |
| 18546/34 | 34.0 – 41.0 | 5 |
| 18546/41 | 41.0 – 49.0 | 5 |
| Part Number | Crimping Range (mm) | Length (mm) |
|---|---|---|
| 702044/12 | 12.0 – 14.0 | 3 |
| 702044/14 | 14.0 – 16.0 | 3 |
| 702044/16 | 16.0 – 19.0 | 4 |
| 702044/19 | 19.0 – 22.0 | 4 |
| 702044/22 | 22.0 – 26.0 | 4.5 |
| 702044/26 | 26.0 – 30.0 | 4.5 |
| 702044/30 | 30.0 – 34.0 | 5 |
| 702044/34 | 34.0 – 39.0 | 5 |
| 702044/39 | 39.0 – 45.0 | 5 |
| 702044/45 | 45.0 – 51.0 | 5 |
| 702044/51 | 51.0 – 57.0 | 5 |
| 702044/57 | 57.0 – 63.0 | 5 |
| Part Number | Crimping Range (mm) | Length (mm) |
|---|---|---|
| 703955/63 | 63.0 – 69.0 | 5 |
| 703955/69 | 69.0 – 73.0 | 5 |
| 703955/73 | 73.0 – 81.0 | 6 |
| 703955/81 | 81.0 – 93.0 | 7 |
| 703955/93 | 93.0 – 105.0 | 7 |
In addition to the standard die sets, a wide range of special die sets for different diameters, lengths and forms is available.
